Saturday, March 1, 2014

Forum Password


# 1
The previous owner of my car knots around with crankcase ventilation, vaccumpumpa (Jet suction) in the system churros is gone, and snakes are just linked someone who can give me an idea of the Hoses pump be connected? The pump looks like: http://t0.gstatic.co...U1JM9VjaFZIFKuu And the engine looks like this: [ATTACH] 29344 [/ ATTACH] A quick ppm also: Can head gasket churros leak oil, so you can see it from the outside without symptoms such as water in oil, water which decreases churros etc? Edit: I'm churros struggling a bit with oljelekkajse also, there are no top cover gaskets, they are changed, but it seems even that it comes fairly high from the engine, there is some oil reservoirs at plugs, at the top, but there may be some stuffing or?
Up
Took some pictures churros now on my motor. At the bottom is the one tube from the intake manifold further into the valve and is split to the brake servo and the crankcase ventilation. One of braking force, and to veivhusvent Here it goes to veivhusrøret I would highly recommend taking both veivhusrøene. They are certainly clogs up of yellow Gugger and stoppage. This can pop the piston rings. churros Pinch on this link and it pops the same at the top on the passenger side. Pinch and pull off. You can Possibly churros turn off resosnanskassen attached to the throttle body. The box in the middle with the V6 logo. Sku hose clamp on the large intake pipe and two pieces churros 10mm bolts middle. Pull straight churros and clean! Regarding oljelekkeasjen these engines tend to leak behind the cam seals. Look behind the peaks for oil spills.
Heihei! Thank you for the very detailed answer hoses are cleaned of coke and Gugger, churros there were some there, you probably imagined this was the reason that the top cover gaskets went pump is on the way from the record, so get fitted it when Ang cam seals are talking about half moon and the other pack? How Can these be replaced if I just remove the top cover? And possibly just loosen the belt and tilt up the cam? Or is there more fuss?
Well I've never done it myself. Before churros dismantling all I would strongly recommend that you buy a bottle of Omega 904 and 918 (some) of Mekonomen. This is a special sealant that companies use to stop the oil leak! Try it first!
Check bit, see image: [ATTACH] 29732 [/ ATTACH] As in the picture, so the pipe from inntaksmanifoilen churros split into two tubes, one is plastic churros ear you see, what else is there that goes into EVEN a valve. (So not I had this before now, according to part no, this is also a jet suction valve) This is where the 3 loose hoses coming from, which put it in something which looked like a valve, which was shaped like a T piece, this I thought was Jet suction valve, churros can anyone confirm what this was?? Have ikken picture of it unfortunately. Looks exactly like it is one valve to bremsekraftforsterkren and 1 to veivhussirkulasjonen, What I did now was to remove the old valve, took away the Y pipe and connected it like the picture, this is good news?
Since we started in 2002 has hundreds of thousands of Norwegians used bilforumet.no to discuss car. We have helped hundreds churros of thousands with everything from car problems, buying used car, legal and otherwise just general chat about the car.
Forum Password


No comments:

Post a Comment